BOTTOM PAINTING
- Use Micron Extra w/ Biolux. No build-up between coatings, able to haul and re-launch.
- Biolux keeps boat slime free.
- Application:
o Lightly sand ablative and apply. 80 grit sandpaper.
o Wipe off sanding with rag dampened with Special Thinner 216.
o Apply 3 coats.
o Roller application – 5/16 or 3/8 inch nap solvent resistant roller.
o Put extra coat to leading and trailing edges, waterline, keel and rudder
o 2 gallons should do it.
|
TEMP |
DRYING TIME |
IMMERSION |
|
50 degrees |
3 hours (16 over old paint) |
16 hours |
|
73 degrees |
2 hours (16 over old paint) |
16 hours |
|
95 degrees |
1 hours (16 over old paint) |
16 hours |
- Sand with 80 grit to remove all old paint.
- Bring metal to shine with medium emory cloth. Remove residue.
- Apply 1 thin coat Viny-Lux Primewash 353/354.
- Allow Primewash to dry minimum of 1 hour but no more than 24 and apply 4 coats Interprotect 2000E/2001E. See dry times on label.
- Apply 3 coats of Interlux Trilux 33.
|
TEMP |
DRYING TIME |
IMMERSION |
|
41 degrees |
8 hours |
36 hours |
|
50 degrees |
8 hours |
30 hours |
|
73 degrees |
3 hours |
12 hours |
|
95 degrees |
2 hours |
10 hours |