PMI/Sheridan Markers

4 .68 Magnums

         4 tired and retired former feild rental .68 magnums.   3 of them are salvageable but the fourth is a goner.    Appearently at some time in their lives the feild airsmith found it necessary to remove the feed blocks.   This operation was undertaken with a hammer.    The barrels of all four are dinged up from this.    One barrel is bent.    The amount of crud packed into the crevices and crannies of these things was unbelievable.

1 of 4 close-up

2 of 4 Close up

3 of 4 Close-up

4 of 4 Close-up

         Close-ups of the four .68 magnums.


Restored .68 Mag number 1

Restored .68 Mag number 2

         A couple of the .68 Magnums after restoration.


PMi-1 Before Restoration

         PMI-1 Before Restoration.


PMI 1 DF (Direct Feed)

         PMI 1 DF (Direct Feed) After Restoration.    Delrin pump, speed demon bolt, Mac-1 Autotrigger. On gun C/A system with 3.5 ounce on/off tank, external velocity adjuster.

PMI 3 or VM 68

         PMI 3 Semi-Auto. Butt ugly, bulky, heavy, awkward, gas sucking, but it's built like a tank. This one has their 'Assault' stock

VM 68

         Another VM-68/PMI 3 with bottomline set-up


Trimmed VM

         VM-68 'Under the knife' in my milling machine.   Trimming some of the fat off of this bad boy.




Return to Image Links