Here is a list of Airsmithing Services I currently offer for Sheridan Markers.    All prices are without shipping.   Shipping costs for the lower 48 States are as follows.    Complete marker (Barrel set) $8.50.    Other parts $4.50.    Outside of the 48 States, E-mail me.

Side View

Bottom View

12 Gram Cartrige Drop-Out slot.   Speeds the changing of 12 gram cartriges by eliminating the need to completely remove the CO2 plug.    Just loosen the plug and the spent cartrige drops out.    I go a step farther with my drop-slot by milling the face of the CO2 plug and pinning it.   This saves a few extra turns and allows the cart to drop out sooner.   Note in the side view image that the front of the grip frame is trimmed back.   This is needed on some older model frames to provide clearance.    No additional charge if this needs to be done.    Price of this service is $35.   This modification is available for PGP's as well but requires additional fabrication which increases the price to $45

Quick Strip Notch.   Allows for fast removal of bolt.    No need to remove or depress the cocking lug.    Easier maintenance and cleaning.    Just twist the bolt and pull.    $12.00.

"Poor Boys" External Velocity Adjuster.   Why Sheridan didn't do this nobody knows.    If you've owned a Sheridan any length of time you know what a pain it is if your velocity is not set right.    This simple modification of the original retainer cap will take care of that problem.    Now you can adjust your velocity without having to dismantle the entire marker.    Labor + screw $4.00 Retainer Cap $5.00.    That is to say, send me your retainer cap and I'll do this for $4.00.   If you want to buy a retainer cap that has been modified it will be $9.00.    Be sure to look at the custom parts section for stylish custom velocity adjusters!

Spring Feed.    Spring Driven Feed system for your stock class feed marker.    Reliably loads a paintball in any position.    Not Stock Class legal but great if you are using a stock feed marker as a back-up or for your semi-auto conversions.    This modification will reduce your capacity 2-3 shots.       $65.00

Barrel Porting.    Quiets the marker down and may improve accuracy.    Adds a nice custom look as well.    $45.00

Sight Rail Installation.    Install basic solder on type of sight rail.    For those who prefer to avoid the epoxy on types.    $6.00

Direct Feed Conversion.    Not as popular as it once was, but if you want your stock class marker converted to Direct feed I can do it.    Right, Left, or Vertical feed is available.    $25.00

Side Tapping.    Install a side tap nipple for constant air hook-up.    $25.00

Tank in stock conversion for KP Rifles.     I can install a 3.5 CO2 tank into the stock of your KP rifle or Hurricane.     Makes a neater, more compact package.     $125.00 tank is not included.

Just For Looks.

While there aren't a whole lot of options available in terms of appearance there are a few things I can do to make your Sheridan stand out from the crowd.   Ball tube milling, Repainting, and Custom Frames are a couple of options.    Due to the amount of work, care, and risk involved this sort of work can be a little higher priced.

'Sharkgill' milling.   Available for markers with stock class feed gives an aggressive 'race' appearance.    Allows visual verification of remaining shots.   $45.00.

Ball Slots.    A more functional milling option available for stock class feed markers.   Allows visual verification of shots remaining.    Not likely to snag things (Such as your holster) like shark gills can.    $35.00.

Repaint.    Strip and repaint your marker, $8.00.    This service is included in the price of any operation that removes material from the barrel, valve, or magazine tube.   Special finishes are available.    I highly recommend Bake On Lacquer if you want a finish that is difficult to scratch and chemical proof.   Cost of Bake On finish is $20.00    Black only.    Upgrade to Bake On finish with any other 'repaint required' work for $12.00.   Bake on finish is available in Gloss or Matte sheens.    Powder Coating will be available Soon!

Custom Frame.    Several different frames can be adapted to fit on Sheridan pumps.    This includes several of the Automag Frames and some Autococker frames.    $20.00 Labor + Cost of Frame (or you provide).    Autococker frames will have a sliding trigger (except hinge types).    Electro-Frames $50.00 (requires significant additional work)

Basic Repair.    I can do most basic repairs, leaking exhaust valves and the like.    Price will vary with complexity of the repair but I'm reasonable.   A leaking exhaust valve will only set you back about $10.00.    E-mail me for a quote.   Repair Quotes