TECHNICAL DATA SHEET
XTRACON IM ALLOY SERIES
Polyurethane Alloys
Xtracon IM Alloy series are intermediate flexural modulus (>50 <250 kpsi)
thermoplastic polymers which are blends of various urethane materials
and proprietary ETP polymers. They may be used for extrusion injection
molding and exhibit outstanding processing characteristics in both of
these applications. Refer to individual data sheets for key physical
properties and other unique attributes.
As with Xtracon concentrates, the first product number suffix designates
the type of urethane used for the alloy. The remaining numbers indicate
the ETP type and level.
| The Series Consists of Five Grades with the Following Base Resins |
| Xtracon IM ALLOY 100-00 | Polyester Urethane |
| Xtracon IM ALLOY 200-00 | Polyether Urethane |
| Xtracon IM ALLOY 300-00 | Ether / Ester Urethane |
| Xtracon IM ALLOY 400-00 | Aliphatic Polyether Urethane |
| Xtracon IM ALLOY 500-00 | Rigid Urethane |
| Appearance | 1/8” x 1/8” Pellets |
| Color | Natural |
Melt Flow Index, 195°C
5 Kg. Load
10 Min., Gms. | 5 - 60 |
| Water Content ( % ) | 0.03 |
| Sp. Gr. | 1.00 - 1.20 |
XTRACON IM ALLOY Series should be stored in a cool dry place and care
should be taken to re-seal containers carefully that have been opened
to avoid contamination by atmospheric moisture.
XTRACON IM ALLOY Series are not considered to be hazardous under
SARA TITLE III. Safe industrial handling and hygiene practices are
always highly recommended. Polyurethanes and other plastics produced
with this product my present a fire hazard in certain applications
if exposed to fire and/or excessive heat, e.g. welding and cutting
torches in the presence of oxygen or air.
Refer to MSDS for more information.
XTRACON IM ALLOY Series are available in 50 lb. bags,
1000 lb. pallets (20 bags- shrink-wrapped) or 1000 lb. Gaylord containers.
The facts stated and recommendations made herein are based
on our research and research of others, and are believed
to be accurate. No guarantee of their accuracy is made, however,
and the product discussed is recommended without warranty on our part,
express or implied, and upon conditions that recipients shall
make their own test to determine its suitability for their purposes.
Likewise, statements concerning the possible uses of the product
are not intended as recommendations to use it in the infringement
of any patent. |
|
|
|
