TECHNICAL DATA SHEET
XTRACON AS
Polyurethane Anti-Static Agent Concentrates

       Xtracon AS series are concentrates for use in thermoplastic polyurethane or polyurethane alloy applications where anti-static properties are required. As internal anti-stats, they have excellent thermal stability and non-blooming characteristics. The degree of electrical dissipation will vary with the amount used and mixing efficiency but levels of 2-5 pphr* have yielded surface resistivity properties from 109 to 1013 ohms/sq.

*pphr is parts per 100 parts of resin

The Series Consists of Five Grades with the Following Base Resins
Xtracon AS-100Polyester Urethane
Xtracon AS-200Polyether Urethane
Xtracon AS-300Ether / Ester Urethane
Xtracon AS-400Aliphatic Polyether Urethane
Xtracon AS-500Rigid Urethane


Appearance1/8” x 1/8” Pellets
ColorNatural
Melt Flow Index, 190°C
8.7 Kg. Load
10 Min., Gms.		75 - 200
Water Content ( % )0.03
Sp. Gr.1.15 - 1.25


       XTRACON AS Series should be stored in a cool dry place and care should be taken to re-seal containers carefully that have been opened to avoid contamination by atmospheric moisture.

       XTRACON AS series are not considered to be hazardous under SARA TITLE III. Safe industrial handling and hygiene practices are always highly recommended. Polyurethanes and other plastics produced with this product my present a fire hazard in certain applications if exposed to fire and/or excessive heat, e.g. welding and cutting torches in the presence of oxygen or air. Refer to MSDS for more information.

       XTRACON AS Series are packaged in 50, 100, 200, 500, and 1000 lb. net fiber-packs or Gaylords. Smaller packages of 1, 5 and 10 lbs. are available on request.


The facts stated and recommendations made herein are based on our research and research of others, and are believed to be accurate. No guarantee of their accuracy is made, however, and the product discussed is recommended without warranty on our part, express or implied, and upon conditions that recipients shall make their own test to determine its suitability for their purposes. Likewise, statements concerning the possible uses of the product are not intended as recommendations to use it in the infringement of any patent.