TECHNICAL DATA SHEET|
Polyurethane Lubricant Concentrates
Xtracon LB series are concentrates for use in thermoplastic polyurethane
or polyurethane alloy applications where improved flow characteristics
and anti-blocking surface properties are required. The LB series are
particularly useful in blown and cast film as well as for profile
extrusion applications and are non-blooming for most urethane resins
at recommended use level. The use of XTRACON LB has also been effective
in providing superior release in injection molding applications and
will provide for outstanding surface characteristics. Use levels
will vary with the application but generally 1-5 pphr have been
effective in many resins.
|The Series Consists of Five Grades with the Following Base Resins|
|Xtracon LB-100||Polyester Urethane|
|Xtracon LB-200||Polyether Urethane|
|Xtracon LB-300||Ether / Ester Urethane|
|Xtracon LB-400||Aliphatic Polyether Urethane|
|Xtracon LB-500||Rigid Urethane|
|Appearance||1/8” x 1/8” Pellets|
|Melt Flow Index|
195°C, 5 Kg. Load
|125 - 250|
|Water Content ( % )||0.03|
|Sp. Gr.||1.15 - 1.25|
XTRACON LB Series should be stored in a cool dry place and care
should be taken to re-seal containers carefully that have been
opened to avoid contamination by atmospheric moisture.
XTRACON LB Series are not considered to be hazardous under
SARA TITLE III. Safe industrial handling and hygiene practices
are always highly recommended. Polyurethanes and other plastics
produced with this product my present a fire hazard in certain
applications if exposed to fire and/or excessive heat, e.g.
welding and cutting torches in the presence of oxygen or air.
Refer to MSDS for more information.
XTRACON LB Series are packaged in 50, 100, 200, 500, and 1000 lb.
net fiber-packs or Gaylords. Smaller packages of 1, 5 and 10 lbs.
are available on request.
The facts stated and recommendations made herein are based
on our research and research of others, and are believed
to be accurate. No guarantee of their accuracy is made, however,
and the product discussed is recommended without warranty on our part,
express or implied, and upon conditions that recipients shall
make their own test to determine its suitability for their purposes.
Likewise, statements concerning the possible uses of the product
are not intended as recommendations to use it in the infringement
of any patent.